Lawn Mower Go Kart - Can I Use a Transmission From a garden Tractor on a Go Cart?

Lawn Mower Racing Engines - Lawn Mower Go Kart - Can I Use a Transmission From a garden Tractor on a Go Cart?

Good afternoon. Yesterday, I discovered Lawn Mower Racing Engines - Lawn Mower Go Kart - Can I Use a Transmission From a garden Tractor on a Go Cart?. Which may be very helpful to me so you. Lawn Mower Go Kart - Can I Use a Transmission From a garden Tractor on a Go Cart?

The qoute with a vertical engine is routing the power from the engine to a horizontal wheels on the go kart. Typically the acceptable recipe for transferring the power on vehicles involves a gear box. For example on a lawn tractor the gearbox is designed with a pulley on the top of the gear box. Additionally, because the main purpose of a riding lawnmower is to cut grass, so the vertical engine layout works very well driving a mower deck.

What I said. It shouldn't be the conclusion that the true about Lawn Mower Racing Engines. You see this article for information about what you want to know is Lawn Mower Racing Engines.

Lawn Mower Racing Engines

The temptation comes in to play to use the gear box in the gokart and keep the unit easy that way. Unfortunately, it is not literally simpler, but more complex, not to mention unreliable.

Additionally, I would strongly steer you away from using a riding lawnmower gearbox for the following reasons:

- Width Of The Rear Axel law Is Too Narrow
- Gear Boxes Are Not Designed For High Speed As In 20+ Mph.
- Gear Box Engagement Requires Belt Tensioning Devices.
- Switching Gears On The Fly Is Not possible Without Good Engine/Gearbox Knowledge.

Width of the rear axel law is too narrow. The width of a gokart drive wheel layout should be relatively speaking wide: 36"+. Riding lawnmowers are under that width and will pose a strangeness in powering the rear wheels. Mounting the gearbox is an additional one issue that requires special bracketry that would need to be fabricated and mounted to the framework.

Gear boxes are not designed for high speed as in 20+ mph. This is a serious consideration, especially with gear boxes that do not want lubrication and do not have roller bearings.

Gear Box Engagement requires belt tensioning devices. Typically, the gearbox is activated by tensioning the belt.

Switching gears on the fly is not possible without good engine/gearbox knowledge. The gearbox on a riding lawnmower does not have synchronizers with it, so the gearbox must be fully idle or still for the gears to be switched.

Actually, in order to get gears to mesh properly, both the mating gears must be in the same position. This can be done by running the gears at the same speed, but this does take some insight of how a gear box operates. Unskilled drivers will have extreme strangeness getting the gearbox to work. More than likely, the gear box will be destroyed in a relatively short period of time, if shifting is thought about on the fly.

Conclusion...

Bottom line is that the transaxle is designed for tractor use and has some limitations. There are some better options that are lighter and more user friendly.

Next time other vertical engine drive systems.

I hope you will get new knowledge about Lawn Mower Racing Engines. Where you may offer use within your daily life. And most importantly, your reaction is passed about Lawn Mower Racing Engines.